EGGSHELL ENAMEL WHITE
Eggshell Enamel provides a satin finish final decorative coating for interior applications and exterior applications in sheltered areas.
- Shop from anywhere
- Store pick up
- Benefit from our loyalty program
Eggshell Enamel is a finishing lacquer of the 3-coat alkyd system: (1) Primer, (2) Undercoat, and (3) Gloss. It provides a satin finish final decorative coating for interior applications and exterior applications in sheltered areas.
Ensure all surfaces are dry, sound and clean; exempt from rust, grease, oil or any other contaminant before painting. Iron oxide must first be coated with Super Galva Primer, Red Oxide Metal Primer or Zinc Chromate Primer; Two Pack Etch Primer is to be used as undercoat for galvanized iron; Mauvilac Wood Primer must be applied to wood. If deemed necessary, Universal Undercoat can be applied as an intermediate coat.
Applicatin Method
Dilute with Test Benzin as required by relative application method. However, to get best results, avoid excessive dilution. Covering rate is between 9 and 11 m2 per coat. Apply 2-3 coats using a roller, brush or sprayer on a dry and duly prepared surface. The Gloss range requires some 4 hours to be touch-dry and can be coated again after 16 hours.
you might also need
You might also like
-
MATT ENAMEL WHITE Rs389.85 – Rs1,661.75 incl. VAT1L5L
Matt Enamel is a matt finish final decorative coating for interior applications.
-
GLOSS ENAMEL Rs385.25 – Rs9,168.95 incl. VAT1L5L20L
Gloss Enamel is meant as the final decorative coat for interior and exterior applications on various types of surfaces: iron oxide, galvanised iron, wood.
-
1L5L
Biogloss is a new generation of decorative lacquers. It is formulated from alkyd resins and vegetal oils emulsions.