Gloss Enamel is meant as the final decorative coat for interior and exterior applications on various types of surfaces: iron oxide, galvanised iron, wood.
- Shop from anywhere
- Store pick up
- Benefit from our loyalty program
Gloss Enamel is a finishing lacquer of the 3-coat alkyd system: (1) Primer, (2) Undercoat, and (3) Gloss. Gloss Enamel is meant as the final decorative coat for interior and exterior applications on various types of surfaces: iron oxide, galvanised iron, wood. Gloss Enamel is “the” DIY paint; it spreads easily, produces a brilliant lacquered finish and is highly washable. Gloss Enamel is weather proof and offers good resistance to corrosion in urban, marine and industrial environments.
Ensure all surfaces are dry, sound and clean; exempt from rust, grease, oil or any other contaminant before painting. Iron oxide must first be coated with Super Galva Primer, Red Oxide Metal Primer¬†or Zinc Chromate Primer; Two Pack Etch Primer¬†is to be used as undercoat for galvanized iron; Mauvilac Wood Primer¬†must be applied to wood. If deemed necessary, Universal Undercoat¬†can be applied as an intermediate coat.
Dilute with Test Benzin¬†as required by relative application method. However, to get best results, avoid excessive dilution. Covering rate is between 9 and 11 m2 per coat. Apply 2-3 coats using a roller, brush or sprayer on a dry and duly prepared surface. The Gloss range requires some 4 hours to be touch-dry and can be coated again after 16 hours.