Repair all surface defects. Ensure all surfaces are dry, sound and clean; exempt from rust, grease, oil or any other contaminant before painting. Ensure that cement and concrete surfaces are not subject to water rise through capillary action. These types of surfaces must however be slightly absorbent for proper adherence of paint. Please refer to technical date sheet for more information.

Apply a first coat diluted with 10 to 20% water to ensure higher penetration. For subsequent coats dilution is not necessary. Covering rate is 8 – 10 m2 per coat. Apply 2 – 3 coats with a roller, brush or sprayer on a sound, dry and prepared surface. Aquasol requires 3 – 4 hours to be touch-dry. It can be covered after 24 hours.