EGGSHELL ENAMEL
Eggshell Enamel provides a satin finish final decorative coating for interior applications and exterior applications in sheltered areas.
- Shop from anywhere
- Store pick up
- Benefit from our loyalty program
Eggshell Enamel is a finishing lacquer of the 3-coat alkyd system: (1) Primer, (2) Undercoat, and (3) Gloss. It provides a satin finish final decorative coating for interior applications and exterior applications in sheltered areas.
Ensure all surfaces are dry, sound and clean; exempt from rust, grease, oil or any other contaminant before painting. Iron oxide must first be coated with Super Galva Primer, Red Oxide Metal Primer or Zinc Chromate Primer; Two Pack Etch Primer is to be used as undercoat for galvanized iron; Mauvilac Wood Primer must be applied to wood. If deemed necessary, Universal Undercoat can be applied as an intermediate coat.
Applicatin Method
Dilute with Test Benzin as required by relative application method. However, to get best results, avoid excessive dilution. Covering rate is between 9 and 11 m2 per coat. Apply 2-3 coats using a roller, brush or sprayer on a dry and duly prepared surface. The Gloss range requires some 4 hours to be touch-dry and can be coated again after 16 hours.
you might also need
You might also like
-
EGGSHELL ENAMEL WHITE Rs415.15 – Rs1,776.75 incl. VAT1L5L
Eggshell Enamel provides a satin finish final decorative coating for interior applications and exterior applications in sheltered areas.
-
HT-332 METAL PRIMER GREY B Rs655.50 – Rs3,050.95 incl. VAT1L5L
High Tech 332 Metal Primer is a vinyl Epoxy Primer for mild and galvanised steel and aluminium. Will provide maximum [+]
-
1L5L
Biogloss is a new generation of decorative lacquers. It is formulated from alkyd resins and vegetal oils emulsions.